Facility Roll-Over Testing

/ / /

We look forward to assisting you

Receive a free consultation. Use the form below or call our 800-509-6170 today

The purpose of the test is to confirm that all facility critical emergency back-up systems perform correctly during a real-world power outage. Critical buss loads should not lose power at any point and all non-critical facility loads should re-establish within 7-10 seconds after loss of utility power. An integral part of the test is to ensure that all equipment performs a successful roll-back after re-establishing utility power.

Data Center Roll Over Testing FAQ

Q:How often should a facility roll-over test be conducted for a data center?

A: The minimum requirement for this to be comleted is on an annual basis. However, some customers may require this be completed quarterly or monthly, depending on the criticality of their operation.

More Testing Services

Data Center Arc Flash Prevention and Safety

The technical team at Titan Power, together with Emerson Network Power, can deliver customized and comprehensive solutions for arc flash safety and compliance. As a leader in electrical testing, maintenance and engineering services, Titan Power is equipped to provide single-point solutions for every area affecting arc flash hazards.

UPS Acceptance Testing

The purpose of the test is to verify that the UPS system is performing to manufacturer’s design specifications. The test is normally performed within 72 hours after equipment installation and successful start-up. However, this test may be conducted at any point in the UPS design life to establish a benchmark (snapshot) of performance.

Load Bank Testing

Resistive load banks are the most commonly used load banks for testing generator sets and power systems. They can provide full KW loading to the power source to completely evaluate the engine cooling, exhaust and fuel systems. They will not load the generator to its full nameplate KVA capacity at 0.8 Power Factor. In order to load the generator to its full KVA rating, reactive load banks will be required.

Infrared Thermography

The purpose of Infrared Thermography is to identify, isolate and document abnormally warm or cool connectors, conductors, or components that may be a potential problem in electrical systems. Exceptions are normally caused by loose or deteriorated connections, short circuits, overloads, load imbalances, or faulty, mismatched, or improperly installed components.

Testimonials

“Since 2020, Titan Power has been a valuable partner to labcorp, ensuring the reliability and efficiency of our critical lab equipment across multiple locations in the Southwest US. They regularly service hundreds of UPS units for us, ensuring our operations run smoothly without uninterrupted power. Their commitment to customer service and proactive approach to maintenance have been key to our success. We highly recommend Titan Power to any organization seeking top-notch UPS maintenance and service.”

“Thank you for all the recent work Titan Power has provided to us recently. Your staff was courteous and professional as always.”

“Thanks for your outstanding service over the last ten years. In all these years, Titan Power has never let me down. No matter what my needs are you always find a way to meet them, promptly and efficiently. From the Service Technicians to my Account Manager to the Owner of the company, it's good to know that I have reliable partners when it comes to Banner's critical power needs.”